FEATURES/ADVANTAGES OF SILICONE POLYMERS :
- This products is 100 % successful for waterproofing Treatment.
- Easy to Apply without any skills. By brush.
- Film thickness is 1 to 1.75 mm in four coat application..
- No need to remove existing Tiles, plaster, or concrete surface.
- Can be used for flat and sloping Roofs or Wall
- Higher tensile strength, tear resistance & bond strength with cement substrates.
- Resistant to weather conditions.
- Light weight waterproofing chemicals does not add extra weight over the roof.
- It is non-toxic in nature & breathable waterproofing.
All Waterseal’s Products & Materials using for Waterproofing ) in this Single Kit
The first reason of leakage by Cracks on roof.You may also visit the sides of your building, drainage pipes, etc. These are the most common sources of leakage.
Find cracks and Fill. For this, you will need Waterseal Crack filler Kit.It is Easy and Permanent solution for terrace leakage. The next step is to fill the cracks or holes with Crack filler Kit.
Step -1.
Use a Hand Scraper Or angle Grinder and
remove any residue from Cracks. So Chemical can be filled in it.
Step -2.
Fill the Cracks using Needle Container
Or Plastic Cup. Mixing Ratio
( 1Part Waterseal Psv + 1 Part Admixture Powder )
Step – 3.
Fill the Crack Groove with mixed filler
using 4″ Putty-knife
( 1Part Waterseal Psv + 2 Part Admixture Powder )
Step – 4.
Seal Crack by Placing FRP Glass Mat
over the crack joint using Paint brush.
( 1Part Waterseal Psv + 1 Part Admixture Powder )
Note : After Drying Apply 2 Coats of the Same Coating over the Frp Glass Mat ( 1Part Waterseal Psv + 1 Part Admixture Powder )
Coverage :
- Approx 120 to 140 Running Feet Per Crack Filler kit Read our Full Post
Leave feedback about this