Clear-coat -Tile Joint Sealant – Used in Terrace,Kitchen,Bathroom Tile Joints
- Appearance Clear, gloss finish
- Usage Bathroom Tiles Joints and Terrace Tiles Joint
- Suitable For Tiles ,China Mosaic and Terrazzo Flooring or previously coated concrete
- Properties Easy to apply, two component clear Epoxy coat + Hardener in Clearcoat – Tile Joint Sealant
- Surfaces Clean and Dry Surface Tiles , China Mosaic and Terrazzo Flooring
- Coverage Tiles and China Mosaic: approx.100 to 125 Running Feet. per kit.
- Complete Curing Time 12 to 24 hours at 30-40°C
- Pot Time (hours) 30 minutes
How to Stop Bathroom Leakage without Removing floor Tiles ?
A surface needs to be properly prepared it should be Clean, Dry and Dust-free.
Make sure that the surface is completely Dry. No pipes or Taps Dripping
No Rising humidity from beneath the ground.
All oils, greases, residues must be properly cleaned before attempting
Waterseal Clearcoat – Tile Joint Sealant
- Make sure that the surface is completely Dry. Clean the Surface thoroughly using cloth.The surface should be free of dust, before application.
- Use a Hand Scraper and remove old grouts(joints)in Tiles. So chemical can be filled in it.
- Mix WATERSEAL’S Clear-Coat )ratio of 1:1. (Minimum Part A- 50 ml+ Part B-50 ml).
- Fill the mixture into Joints By Needle Container Use the mixture in less than 30 minutes,else it will start drying.Joints will take 4 to 6 Hours to Dry. After repeat Same Procedure and Fill the All Joints
2nd Time. Once all joints are filled up.
- Fill the Big Crack & Joint Grooves with mixed filler using Putty-knife (4″ Hand Scraper)(1Part Clear coat mixer + 2 Part Crack Grouting Powder )Clean the Surface thoroughly using cloth. let the surface to dry for at-least 12-18 Hrs.
- For better results : Coating all over the tiles by Paint Brush and Roller.
- Warning: Never add the left over mixture back to the chemical container else the chemicals will start drying. Store in cool & well- ventilated Place.