Bathroom leakage Solution – without removing tiles
Waterseal clear coat is Super glossy Clear-Coat Cracks & Tile Joints Sealant
Let’s Fix a Bathroom leakage in 3 hours with waterseal Clear-Coat
Use for Terrace,Kitchen,Bathroom and Swimming Pool’s tile joints and crack Grouting.
Waterseal Clear Coat is also used to Seal Bathroom leakage from Decorative Terrace and Balconies that are often used for parties or functions . Waterseal Clear coat provides Transparent Coating over the Designed surface thus preserving the look of the floor while giving waterproof results. 2 Coats of Waterseal clear coat over the surface is advisable to get 100% waterproof Results.
We can Waterproof Textured floors,Swimming Pools, Decorative China mosaic, Terrazzo Flooring,Fancy tiling ,etc while maintaining its actual look. We get a super finish Gloss over the surface after Clear coat.
Waterseal Clear-Coat Cracks & Tile Joints Sealant
- Appearance Clear, gloss finish
- Usage Interiors
- Suitable For Tiles ,China Mosaic and Terrazzo Flooring or previously coated concrete
- Properties Easy to apply, two component clear coat + Hardner
- Surfaces Clean and Dry Surface Tiles ,China Mosaic and Terrazzo Flooring
- Coverage Tiles and China Mosaic: approx. 150 sq. ft. per Single kit.
- Complete Curing Time 72-96 hours at 30-40°C
- Pot Time (hours) 30 minutes
1. Clear-Coat (Part -1) : 500 ml
2. Clear-Coat (Part -2) : 500 ml
3. Crack Admixture Powder : 500 Gm
FREE SAMPLES WITH KIT:
4. Needle Bottle 100 ml – 1
5. 4″ Hand Scraper : 1
6. Hand Gloves : 1 Pair
7. Measuring cup For 100 ml – 1
8. Hand Grout ( Diamond ) Cutter : 1
9. How to Apply Instruction- Hard Copy.
10. 2″ Paint Brush : 1
TOTAL 10 ITEMS
Waterseal Clear-coats is a Fantastic Product that can create seamless resinous floors.
Surface Preparation : Always Grind the surface( by Floor Polishing machine) for making it Ruff before applying Clear-coat.
A surface needs to be properly prepared. This means it should be Clean,Dry and Dust-free.
1) Make sure that the surface is completely Dry. 2) No pipes or Taps Dripping. 3)No Rising humidity from beneath the ground.
All oils, greases, residues must be properly cleaned before attempting Waterseal Clear-coat’s coating.
Application Method for tiles joints:
1. Make sure that the surface is completely Dry. Use a Poker or Hand Cutter and remove old grouts(joints)in Tiles. So chemical can be filled in it. cleaning joints before filling grout or to remove cement based grout
2. Clean the Surface thoroughly using cloth. The surface should be free of dust, grease or any residue before application.
3. MOST IMPORTANT MIXING RATIO
For Terrace Tile Joints : Mix WATERSEAL’S Clear-Coat (Part A- 50 ml+ Part B-50 ml) Ratio of 1:1 ( Flexible and Slow setting Coating for Open space)
For Bathroom Tiles Joints (Part A- 50 ml+ Part B-25 ml) Ratio of 2:1. (Hard and dry Coating)
use 100 ml Measuring cup And fill the Mixture in Needle Container.
4. Fill the mixture into Joints using needle container. Use the mixture in less than 30 minutes, else it will start drying. repeat Mixing Ratio (Step 4) and complete your job.
5. Joints will take 24 to 48 Hours to Dry.
6. Once all joints are filled up ,let the surface to dry for at-least 24 Hrs.
7. For better results : Coating all over the tiles by Paint Brush.
Warning: Never add the left over mixture back to the chemical container else the chemicals will start drying. Store in cool & well- ventilated Place.